Fitment:

Features:

Important Note: The resistor will get hot - do not bundle the resistor up with the rest of the wiring harness. During installation, ensure it is away from the other wiring - some customers use high-heat double-sided tape, metal zip ties or other high-temp fasteners.

Notes:

Compatible with both non-LED and LED Gladiators. On rare occasions, some customers with LED Gladiators have experienced an in-dash error that is easily solved by using a Tazer from Z-Automotive.

The Tail Gunner Tail Lights are designed and engineered for North American Jeep models.

The Combat Off Road LED tail light kit (Tail Gunner Tail Light Kit) is not designed or recommended to be used or installed on any Jeep JL or JT Gladiator that are equipped with the blind spot monitoring system. If you choose to disable the blind spot monitoring system with a tuner, programmer or any other computer interface device (i.e. Tazer from Z Automotive, Superchips Flashcal+, etc), Combat Off Road does not accept any responsibility or liability for the compromise of the safety features or any injury, damages, claims, expenses, or responsibility that may be caused or alleged to be caused, in whole or in part, by the removal of those features. Combat Off Road recommends the Tail Gunner Tail Light Kit be used for off road use only.
Some vehicles may require the use of a tuner, programmer or other computer interface device (i.e. Tazer from Z Automotive, Superchips Flashcal+, etc) to adjust some factory software settings in order for tail lights to work as intended.