Steer Smarts 79040002

The YETI XD JL/JT Sector Shaft Brace With Frame Side Track Bar Reinforcement Bracket was engineered to bolt onto the stock track bar mount on the frame. The purpose of this piece is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing/deflecting/moving when cycling your steering system side to side.

The second part of the product is to reinforce the frame side track bar mounting location to help minimize any deflection of this bracket and ensuring that the mount doesn't break under extreme stress.

Note: If you've had the TSB (technical service bulletin) work performed on your pre-2021 Wrangler or Gladiator, you will want to use the 4x short gear bolts. The fastener bag provides bolts for both aluminum and steel gear variations.
The Aluminum box requires 2x short gear and 2x long gear bolts whereas the Steel box requires 4x short gear bolts.

**Big Bore gearbox's also require our BIG BORE SUPPLEMENTAL KIT #79079001

***Fitment Issues may be present with certain aftermarket track bars -- fitment based on angle/how the hoop is bent as they can cause interference. We have seen fitment issues with the following track bars: ROUGH COUNTRY, CORE4X4...

****Requires minimal 2" Lift.

NOTE: This product is NOT COMPATIBLE WITH DROP PITMAN ARM (ask us about replacing drop pitman with the proper solution).

***NOT COMPATIBLE WITH 2024+ MODELS - Use 79041001***