Accuair Air Suspension System 3.5" Dynamic Lift kit for 2018-24 Jeep Wrangler JL Unlimited (2.0L and 3.6L non-eTorque) AA-4104
- Manufacturer: Accuair
- Part: Lift Kits - Upgrade Kits
Fits: (2.0L and 3.6L non-eTorque Models)
Don't wait for adventure to find you. AccuAir's Dynamic JL 3.5" lift kit provides a top-of-the-line performance suspension upgrade with tons of versatility and functionality to take you on every adventure you could ever dream of. Raise and lower your Jeep on demand to meet your needs and have the best ride in the industry!
Our 3.5" lift kit easily clears 37" tires on 4.5" back-spaced wheels. You can go practically anywhere.
You can install this kit in your garage! 100% bolt-on: no cutting, no drilling, or no welding needed to upgrade your Jeep at home. We provide a detailed, easy-to-read installation guide that walks you through every step of the process. Once installed, simply press a button on the hardwired TouchPad controller or Bluetooth-enabled ePlus app and enjoy your new dynamic suspension.
Need to tow a trailer or haul equipment? This rugged suspension system allows you to easily haul the max Jeep Wrangler JL tow rating and allows you to automatically level your load. Our kit eliminates the sag that many experience with traditional lift kits.
Never worry about adding a winch bumper, tire carrier, or rooftop tent. Our Dynamic lift kit automatically compensates for anything you add to the vehicle. Our system is great for everyone.
You don't have to lose ground clearance or risk damage to your vehicle by adding low-hanging steps. This kit allows you the flexibility to lower your vehicle for easy entry and exit.
When the trail ends, your fun doesn't have to. The underbody-mounted 3-gallon air tank and compressor provide all the onboard air you need to quickly and efficiently inflate tires, water toys, camping furniture, and more.
Press Position 1 on the controller, which lowers the Jeep 1", so your family and pets can easily get in the Jeep.
The kit defaults to the standard 3.5" lift when you're going 25MPH or faster. With this safety feature, choose your preset height to navigate low garages and drive-thrus OR raise your Jeep to navigate offroad obstacles.
Want to go offroad or rock crawling? Using AccuAir Crawl Control under 25MPH, you can raise your entire Jeep by 2" or lower by 1". You can also raise and lower individual corners to tackle obstacles on the trail. Planning to camp? You can adjust individual corners to create a level platform for sleeping.
Fitment:
18+ Jeep Wrangler JL Unlimited
Features:
Speed-Based Suspension ModesSteering & Geometry Correction
Tank, Compressor, & Valve Block Under Vehicle
On Board Air for Tire Inflation, Tools, Etc.
Off-road Ability 1.5” – 5.5”
Ability to access garages with oversize tires
Entry/Exit Height of Stock Jeep
Parts Included:
Air Suspension Conversion KitJRi Custom Tuned Shocks
e+ Connect
TouchPad+ Upgrade
Height+
Height Sensor Brackets
VU4 4-Corner Manifold
3 Gallon Seamless Tank
VIAIR 485C Compressor
VIAIR Inflation System
Front Lower Control Arms
Rear Upper and Lower Control Arms
Adjustable Front Track Bar
Front and Rear Sway Bar Quick Disconnects
Rear Track Bar Relocation Bracket
Front and Rear Brake Line Extension Brackets
Install Kit for ECU, Air Tank, Compressor
Air Compressor Bracket
Important Note: 4-door models only, 2.0L and 3.6L (non-eTorque). Wheel setup with a minimum of 4.5" of backspacing is required with a maximum 9" wide wheel.
Notes:
Air springs are used to support vehicles instead of coil springs. This is not the same as helper air springs that assist the coil spring suspension. With helper springs, the ride can be rougher due to the added spring force, but that's not an issue with a dedicated air spring. A vehicle's air spring is made up of a rubber sleeve, a metal piston, and a body mount, which are filled with pressurized air. When the suspension articulates, the sleeve rolls over the piston for a smooth and comfortable ride. Like a tire, the sleeve is very resistant to wear and punctures. The sleeve is attached to the piston and body by crimp rings. There are also some air springs with internal bump stops. The body mounts fix the spring to the vehicle, but like coil springs, suspension travel must be limited by either the shock absorber or limit straps. Air can be added to or removed from the spring to control the vehicle's posture, unlike traditional coil springs, which have a fixed height and settle over time. You don't have to guess about spring lengths or rates to get the right height for your Jeep.
| Searchable Sku | AA-4104 |
|---|---|
| Manufacturer | Accuair |
