Pedal Commander Bluetooth Throttle Response Controller For 2018-20+ Jeep Wrangler JL & Gladiator JT Models PC78-BT
SKU
PED-PC78-BT
We Price Match
- Manufacturer: Pedal Commander
- Part: Programmers
The Throttle Response Controller by Pedal Commander will eliminate electronic accelerator pedal response delay in your Jeep Wrangler JL. This allows your engine to respond quicker resulting in faster acceleration.
Special Price $398.61 Regular Price $468.95
Pedal Commander PC78-BT
The Throttle Response Controller by Pedal Commander will eliminate electronic accelerator pedal response delay in your Jeep Wrangler JL. This allows your engine to respond quicker resulting in faster acceleration.
Eliminates Delay.
Nowadays, vehicles are notorious for their delayed throttle response. That's where the Pedal Commander comes in. These days, vehicles use a drive-by-wire system that monitors the position of the gas pedal to control the throttle electronically, similar to a dimmer switch. The problem with this setup is that the signal from the pedal has to first be sent the ECU, which in turn then sends the signal to the actuator motor that controls the throttle body itself. This delay is most noticeable when trying to speed up to merge with fast moving traffic or pass a slower moving car. However, the Pedal Commander Bluetooth Throttle Response Controller will eliminate that delayed throttled response, giving your vehicle a drastic night and day difference in performance.
Four Adjustable Control Modes.
Unlike other throttle control devices that are either on or off, the Pedal Commander comes with 4 control modes: Eco, City, Sport and Sport +. Best of all, each mode has an additional 8 different levels of sensitivity which allows you to personally adjust each mode to your own personal driving style and needs. Switching between modes can be done manually on the Commander or can also be done using your smartphone (Pedal Commander App), without having to bend over and physically touch the Pedal Commander.
Compatible with Aftermarket Programmers.
The Pedal Commander can be used in conjunction with common aftermarket OBD-II programmers and/or monitors such as: SCT, Diablosport, Hypertech, Superchips, Bully Dog, and Edge.
Modes:
Eco Mode: Will reduce engine response 50% slower than stock. Can help up to 20% savings in fuel.
City Mode: Increased response for active traffic. Suggested for daily drive
Sport Mode: High performance response for spirited driving.
Sport+ Mode: Extreme response. Strongly suggested for Track & Race use.
Old Part Numbers: PC07-BT
Alternative # PC78
The Throttle Response Controller by Pedal Commander will eliminate electronic accelerator pedal response delay in your Jeep Wrangler JL. This allows your engine to respond quicker resulting in faster acceleration.
Eliminates Delay.
Nowadays, vehicles are notorious for their delayed throttle response. That's where the Pedal Commander comes in. These days, vehicles use a drive-by-wire system that monitors the position of the gas pedal to control the throttle electronically, similar to a dimmer switch. The problem with this setup is that the signal from the pedal has to first be sent the ECU, which in turn then sends the signal to the actuator motor that controls the throttle body itself. This delay is most noticeable when trying to speed up to merge with fast moving traffic or pass a slower moving car. However, the Pedal Commander Bluetooth Throttle Response Controller will eliminate that delayed throttled response, giving your vehicle a drastic night and day difference in performance.
Four Adjustable Control Modes.
Unlike other throttle control devices that are either on or off, the Pedal Commander comes with 4 control modes: Eco, City, Sport and Sport +. Best of all, each mode has an additional 8 different levels of sensitivity which allows you to personally adjust each mode to your own personal driving style and needs. Switching between modes can be done manually on the Commander or can also be done using your smartphone (Pedal Commander App), without having to bend over and physically touch the Pedal Commander.
Compatible with Aftermarket Programmers.
The Pedal Commander can be used in conjunction with common aftermarket OBD-II programmers and/or monitors such as: SCT, Diablosport, Hypertech, Superchips, Bully Dog, and Edge.
Modes:
Eco Mode: Will reduce engine response 50% slower than stock. Can help up to 20% savings in fuel.
City Mode: Increased response for active traffic. Suggested for daily drive
Sport Mode: High performance response for spirited driving.
Sport+ Mode: Extreme response. Strongly suggested for Track & Race use.
Old Part Numbers: PC07-BT
Alternative # PC78
Fitment:
Engines: 2.0L; 3.6L; 3.0L2020+ Jeep Gladiator (JT)
2018+ Jeep Wrangler (JL)
2018+ Jeep Wrangler Unlimited (JL)
2019 and Newer Ram Trucks - All Models
Features:
Faster engine response resulting in faster accelerationFeaturing 4 modes with ECO, City, Sport & Sport+. Boasting 8 sensitivity levels in each mode (+4 raise & -4 low)
Offering the latest advances in Bluetooth technology allowing you to easily connect to your devices
Plug & Play into factory harness providing for a simple installation
Premium Quality 3M keypad with the top-notch CPU's for a reliable design
Warranty:
2 Year Warranty
Parts Included:
(1) Throttle Response Controller(1) Mounting Bracket
Installation Instructions
| Searchable Sku | PC78-BT |
|---|---|
| Manufacturer | Pedal Commander |
