MetalCloak Dog-Legged Tie Rod & RockSport RED Stabilizer Kit for 18+ Jeep Wrangler JL, JLU & 20+ Gladiator JT 7623-
SKU
MTK-7623-
We Price Match
- Manufacturer: MetalCloak
- Part: Steering - Upgrades
Chromoly Dog-Legged Tie Rod & RockSport RED Steering Stabilizer kit for the Rubicon JL Wrangler/JT Gladiator is the perfect upgrade from your stock steering system.
As low as $752.76 Regular Price $940.95
Metalcloack 7623-
Chromoly Dog-Legged Tie Rod & RockSport RED Steering Stabilizer kit for the Rubicon JL Wrangler/JT Gladiator is the perfect upgrade from your stock steering system.
Exclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. Metalcloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.
The heavy duty 7GA adjustable steering stabilizer mount bracket installs into the factory location and re-positions the stabilizer up and out of harm’s way. RockSport steering stabilizer/damper has increased compression and extension damping performance over the original equipment and is tuned specifically for the JL and JT Jeeps.
The optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
This improved performance will assist in the overall ride and control of your Jeep.
Chromoly Dog-Legged Tie Rod & RockSport RED Steering Stabilizer kit for the Rubicon JL Wrangler/JT Gladiator is the perfect upgrade from your stock steering system.
Exclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. Metalcloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.
The heavy duty 7GA adjustable steering stabilizer mount bracket installs into the factory location and re-positions the stabilizer up and out of harm’s way. RockSport steering stabilizer/damper has increased compression and extension damping performance over the original equipment and is tuned specifically for the JL and JT Jeeps.
The optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
This improved performance will assist in the overall ride and control of your Jeep.
Fitment:
18+ Jeep Wrangler JL18+ Jeep Wrangler JL Unlimited
20+ Jeep Gladiator JT
Features:
Tubular 1.625”OD .375” wall ID 4130 Chromoly CDSGold Zinc Chromate Finish
1-Ton Forged Heat Treated Off Set Dog Leg Rod Ends
Rod End Design Controls Tie Rod Flop
OE Taper Pin and lock nut for Exact Fitment
Sealed with Durable Rubber Grease Boots
Adjustable While Installed
Includes HD Steering Stabilizer Bracket
Specifically tuned RockSport stabilizer/dampener
WORKS WITH JL/JT STOCK WHEEL BACKSPACING!
Parts Included:
Tie RodDog Legged Tie Rod Ends
Standard Tie Rod Mount or Billet Tie Rod Mount
Steering Stabilizer Mount
RockSport Steering Stabilizer
All Required Hardware
Important Note: For the Rubicon|Max-Tow|4XE|High Altitude|Mojave|392 Edition
Notes:
Note: Minimum 2" lift required.
Note: The RockSport steering stabilizer kit works with Left Hand Drive applications only.
Note: Raised steering stabilizer requires at least 2” of bump stop to clear frame
Note: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.
Searchable Sku | 7623 7623-B |
---|---|
Manufacturer | MetalCloak |